Tailored solutions for industrial flow measurement

About the co-operation with Maxonic Automation since 2003

After over 15 years co-operation, there are about 2 million euro trade each year. The cooperation products are including of deltaflow, deltaflowC, DeltaMagneto, DeltaGWR, DeltaRadar, DeltaMag, deltawave ,deltawaveC and other DELTA series products which are sold to Chinese market from Germany.


deltaflow

It is pitot tube, which is one element generation different pressure (DP) while flow passing. Then calculation out the flow rate by different transmitter, temperature transmitter and pressure transmitter if wish get mass flow. It can measure steam, liquid or any kinds of gas. Since 2003 to 2011, there are about 25,000 units to sale into Chinese marketing.

deltaflowC

It is a sensor working on the DP-sensor, P- and T-sensor and micro-controller to calculate the mass flow (standard-volume- flow) of gases in pipes, not liquid and steam. DeltaflowC was developed to measure air and other non-explosive and non- corrosive gases in the pipes and channels in a very precise, cost effective way. By the advanced and patented uc- technology, deltaflowC has an extrodernary performance in terms of zero stability, dynamic, flow range and accuracy.

deltaflowC measures real mass flow and compensates the influence of changes in static pressure and temperature on the signal. Compared with other technologies such as thermal mass flow meters, deltawaveC is widely resistant to long term drift by coatings and dust on the sensor surface. Intelligent zero- drift compensation algorithms make deltaflowC to zero- maintenance flowmeter. It can be used in ultra-wide flow, temperature and pressure range. Beside this, deltaflowC will exist in only one dimension for all pipe diameters and can therefore be ordered on stock. Competitive pricing and fast delivery are a result of this. Its application is only for all kinds of gas, such as pressurized air, air conditioning,combustion air regulation of burner air, drying air, process air,....


DeltaMagneto

It is high-precision and robust level sensor and to provide continuous gauging of liquid media levels in tanks. The measuring principle used by the sensors exploits the physical effect of magnetostriction and is largely unaffected by temperature. Magneto-striction is particularly ideal where level measurements are required to be extremely accurate, e.g. In the chemical industry. Since 2002, Maxonic had sale out about over 4000 units DeltaMagneto in chemical plant, oil refinery or power plant. Its high precision can up to +/-0.25MM for its all measurement range (about 4~6m). Its safety factor is amazing high, MTTF can be up to 407 years, SIL 2.

DeltaMag (Electromagnetical Flowmeter)

DeltaMag (Electromagnetic Flowmeter)

used for measurement any conducting liquid in different pipes, such as normal water, acid, alkali, salt, seriflux, paper pulp, ore pulp, ect. DeltaMag was developed and researched by Arkon company, UK. They produced  first generation product in last century 60’S. After then, they set up its produce Centre and calibration base at beautiful ancient city Brno, Czech Republic. There are many application in the many different field in Europe, American and Asia.

The serial products have two very important specialty. One is the sensor and be parted two area with over 900m. The second is based on internet or web base. It has many function boards for opinion, such as RGPS, Bluetooth, TCP/IP, USB, GSM-SMS, 4~20mA, RS485, RS232, PULSE,esc.

Now the products have developed into DEX serial fromi-mag, it is based on three design idea.

i Serialize produce design, it can meet different application and working site.

S Intelligentize design: it can be self diagnosis, self adaptive and self adjusting.

X Modularization design: Fast configuration, economical, meeting different requirement  


deltawave

It is the first ultrasonic multimeter that can acquire, apart from the flow, the flow profile and turbidity or solid load, as well as the mean medium temperature and changes in the medium composition. Deltawave can measures everywhere: in the fulled pipe, in the partially filled pipe, open canals, channels channels and rivers. Deltawave also works under extreme conditions, maintenance-free, calibration-free and reliably. The measurement system monitors safety itself continuously and the multi-canal property ensures redundant safety. It was installed in Chinese hydro-power station with 11.7m pipes (4 units), 9m pipes( 8 units) and 6.5m (6 units).


deltawaveC

It is a portable clamp-on ultrasonic flow meter for measuring liquids in the filled piping systems. It operates by the ultrasonic transit-time differential method. The heat measurement is including as standard application. Optional clamp-on PT100 temperature sensors are available. It can be operated in cordless mode as well as on a power adaptor for operation with 100% duty cycle. It is also available as stationary version (deltawaveC-F)

Contact & Information

Phone : ++49-(0)89-80906-0
Fax.  : ++49-(0)89-80906-200
eMail: info@systec-controls.de


Head Office

systec Controls Mess- und Regeltechnik GmbH
Lindberghstraße 4
82178 Puchheim
Germany


Contact form

On these pages you find comprehensive information about how to get in touch with systec Controls and its representations. If you wish to contact us, please use the form below.


Your personal data

Name *

Company

Street *

ZIP Code *

City *

Country *

Phone

E-Mail *

Desired Informations

deltaflow
deltaflow-Pitot
flowcom
deltafit
deltawave
deltawaveC
Accessories

Optional description of a special measurement problem

 Please enter security code. *